Leistritz Produktionstechnik GMBH - Logo

Partner for modern technology

Products / Keyseating Machines - Standard Centering Sets

Cone centering Centering stepped bush Centering continuously adjustable

Cone

The workpiece is steplessly centred by the cone against the bore chamfer, positively locating it to the cutter tool.

Stepped bush

The workpiece is centered by the stepped bush against its bore chamfer, positively locating it relative to the cutter tool. The stepped bush also clamps the top face of the workpiece.

Continuously adjustable

The workpiece is clamped using a three point clamping system with fixed and adjustable clamping elements. The workpiece can be eccentric to the machine whilst remaining firmly clamped.

Standard Tooling Equipment for LEISTRITZ Hydraulic Keyseating Machines


Tooling sets (complete equipment)

  

WC 2

WC 3

WC 4

WC 7

WC 9c

WC 9

WC 10

WC 11
maximum cutting length mm 100
 100
 150
 500
 800
 1000
 1250
 1500
Cutting width
mm
 2-3
 3-6
 6-12
 12-22
 22-50
 22-50
 54-100
 100-150
Bore diameter Ø mm
 10-13
 13-20
 20-40
 40-85
 80-230
 85-260
 200-500
 230-750
Cutter guide bar diameter mm 10 13 20 40 70 85 110 140

Possible Applications of the Centerings for Workpiece Bores


Tooling sets (complete euipment)

  

WC 2

WC 3

WC 4

WC 7

WC 9c

WC 9

WC 10

WC 11
Conical centering

mm 10.5-13 14-20 21-40 41-85 80-230 85-260 --- ---
Stepped centering bush
mm
 --- 14-20 25-40 45-85 80-230 90-200 --- ---
Continuously adjustable centering range mm
 --- --- 40-160 60-200 100-300 130-400 200-500 200-500,
230-750